TGE Reaches New Shipment Record With 27,300+ Products In September
Oct 08, 2026
Leave a message
[TL;DR] In September 2026, TGE shipped more than 27,300 rubber components to customers in six countries - France, Italy, India, North Macedonia, Spain and Australia - the highest monthly shipment volume since the company's business division was established. Alongside our established rubber valve cores and rubber-metal bonded components, TGE also delivered a new category of non-valve-core custom rubber components to a new customer in China, extending the company's product portfolio beyond its traditional range.
September 2026 Shipment Record at a Glance
| Parameter | Value |
|---|---|
| Reporting month | September 2026 |
| Units shipped | 27,300+ rubber components |
| Destination countries | 6 - France, Italy, India, North Macedonia, Spain, Australia |
| Regions covered | Europe, Asia, Australia |
| New product category | Non-valve-core custom rubber components (first delivery to a new China customer) |
| Milestone | Highest monthly shipment volume since the TGE business division was established |
Two things make this record worth reading for anyone sourcing industrial rubber parts: the volume was spread across three continents rather than one large order, and it included a product family TGE had not previously shipped at scale.
1. Six Countries, Three Continents: Where TGE Shipped in September 2026
TGE products are now supplied to customers across Europe, Asia and Australia. In September 2026, orders shipped to the following markets:
|
France Region: Western Europe |
Italy Region: Southern Europe |
India Region: South Asia |
|
North Macedonia Region: Southeast Europe |
Spain Region: Southern Europe |
Australia Region: Oceania |
Serving six countries in a single month is not only a volume question. Each market brings its own specification requirements, documentation expectations and delivery schedules, and different customers are at different stages of their projects. Keeping all of them supplied at once is what the record actually demonstrates. The underlying capability base is TGE's work as a rubber metal bonded components manufacturer and rubber valve core manufacturer, which the September schedule also drew on.
2. From Rubber Valve Cores to Custom Rubber-Metal Bonded Components
TGE has extensive experience in rubber-metal bonded components and rubber valve cores. At the same time, the company continues to expand its product capabilities, and the September milestone included a delivery that sits outside the traditional range.
|
Rubber Valve Cores A long-established TGE product line, supplied to valve and pneumatic system manufacturers that need consistent sealing behaviour over repeated actuation cycles. |
Rubber-Metal Bonded Components Rubber moulded directly onto a prepared metal substrate. The rubber element provides sealing, elastic compensation and buffering while the metal carries structural and positioning loads. |
|
Custom Moulded Rubber Components Non-valve-core rubber parts developed to a customer's drawing, working conditions and assembly requirements, using tooling that can be retained for reorders. |
Application-Specific Rubber Compounds Compounds developed in-house rather than chosen from a catalogue, so hardness, elasticity, compression set and ageing resistance are matched to the actual operating environment. |
In September, TGE delivered a new category of non-valve-core rubber products to a new customer in China. This is an important step in expanding the product portfolio: it shows that the company's rubber formulation, moulding, bonding and manufacturing experience transfers to different customised rubber components rather than being tied to a single product family.
3. What International Buyers Need - and How TGE Delivers
Working with customers in different markets is not the same as shipping to them. It requires consistent product quality, clear technical communication, flexible manufacturing capability and reliable delivery at the same time. Here is how those four requirements map onto what TGE actually does.
| What buyers require | How TGE supports it |
|---|---|
| Consistent product quality | Compound control, process stability and final inspection applied across every batch, so a part supplied in one month matches the part supplied in the next. |
| Clear technical communication | Direct engineering dialogue on material, structure and application conditions - including working conditions that affect sealing performance. |
| Flexible manufacturing capability | In-house compounding and tooling allow custom rubber components to be developed alongside standard product lines. |
| Reliable delivery | Multi-project production scheduling that holds lead times stable as order volume grows, rather than degrading under load. |
As a custom rubber components supplier and rubber-metal bonded parts manufacturer, TGE also works as a custom moulded rubber parts supplier for sealing components, moulded parts and other application-specific custom rubber parts. Buyers who need one industrial rubber components supplier for both standard and application-specific parts can consolidate them onto a single production schedule, which is a large part of how six countries were served in one month.
4. How TGE Keeps Quality Stable as Shipment Volume Grows
As the business grows, product quality remains at the centre of TGE's manufacturing philosophy. Volume only counts if the products arriving in month twelve perform like the ones that passed first-article approval.
For rubber metal bonded components and rubber-metal bonded components alike, reliable performance depends on several factors working together:
- Rubber formulation - hardness, elasticity, compression set and ageing resistance selected for the application rather than defaulted.
- Metal preparation - surface treatment of the substrate, which determines whether the bond has anything reliable to grip.
- Bonding technology - adhesive system and process control across the rubber-to-metal interface.
- Moulding - cavity fill, cure time and temperature held consistent across production runs.
- Dimensional control - geometry kept within the tolerance that assembly and sealing performance require.
- Inspection - verification of bonding, dimensions and sealing behaviour before shipment.
TGE continues to focus on these areas to provide customers with stable and application-oriented products. The goal is not simply to increase shipment volume, but to build long-term customer relationships through reliable quality, technical capability and dependable delivery.
5. Looking Ahead: New Markets and New Rubber Product Categories
The shipment of 27,300+ products to six countries in September 2026 is an important milestone for TGE, and a reflection of the trust built with customers over time. Moving forward, TGE will continue to:
- Expand its international markets - building on established supply to Europe, Asia and Australia.
- Develop new rubber product categories - extending beyond valve cores and rubber-metal bonded parts into new custom component families.
- Provide customised rubber and rubber-metal bonded components for industrial applications, matched to specific working conditions rather than sold as off-the-shelf parts.
For buyers, the practical question is whether a supplier can hold quality, technical communication and delivery together while growing. A month like September 2026 is one data point; a retained specification across reorders is the more useful one.
Frequently Asked Questions
A. Products & Markets
What rubber products does TGE manufacture?TGE manufactures rubber valve cores, rubber-metal bonded components, custom moulded rubber components and the application-specific rubber compounds behind them. Rubber-metal bonded components are the company's core product family, and valve cores remain a long-established line; custom non-valve-core rubber parts are the newer extension of that portfolio.
Because compounding is done in-house, TGE can adjust the material to a customer's working conditions instead of limiting the choice to a fixed catalogue of compounds.
TGE products are supplied to customers across Europe, Asia and Australia. In September 2026 the company shipped to six countries: France, Italy, India, North Macedonia, Spain and Australia.
That month's volume - more than 27,300 components - was the highest monthly shipment total since the TGE business division was established.
B. Custom Development & Quality
What is rubber-to-metal bonding, and why does it matter?Rubber-to-metal bonding is the process of moulding a rubber element directly onto a prepared metal substrate so the two behave as one component. The rubber provides sealing, elastic compensation and buffering; the metal provides structural support, installation positioning or other mechanical functions.
It matters because the bond - not the rubber alone - determines long-term reliability. If the interface fails in service, the sealing or vibration-damping function is lost even though the rubber material itself is still intact.
Yes. Different industrial equipment operates under different temperatures, compression loads, cyclic mechanical loads and media, and there is no universal rubber formulation that suits all of them. TGE develops compounds in-house against the customer's actual working conditions and product structure, then validates them through the manufacturing process.
For rubber-metal bonded parts this starts at the formulation stage: the final product's operating environment and the manufacturing route are both taken into account before the compound is fixed.
Bonding reliability is controlled through six stages rather than one final inspection: rubber formulation, metal preparation, bonding technology, moulding, dimensional control and inspection. Each stage has its own failure mode, so each one is held to spec across production runs.
This is what allows a part supplied in one month to match a part supplied in another - the property that matters most when a customer scales from a trial order to a recurring schedule.
C. Working with TGE
How do I start a custom rubber component project with TGE?Contact TGE with the application details. The most useful starting point is the working conditions the part will face - temperature range, compression or load type, media exposure, cycle frequency - together with a drawing or sample of the existing component if one exists.
From there TGE reviews the material and structural requirement, proposes a compound, and confirms the moulding and bonding process before production. Existing tooling can often be reused, which shortens the path from enquiry to first samples.
Still Have a Question?
Looking for a reliable rubber component supplier for custom rubber components or rubber-metal bonded parts? Send TGE your application details and drawings, and the engineering team will come back with a material and process recommendation rather than a generic catalogue part.
TGE - Rubber Material Expertise. Reliable Bonding. Application-Focused Solutions.
Rubber formulation, rubber-to-metal bonding technology and customised rubber components for industrial applications.
Send Inquiry